NPS40 Rear Vent Pellet Stove
A renewable energy source, environmentally friendly, economical, convenient...these are just some of the reason a Napoleon pellet stove or insert is the perfect solution to heat your home. The freestanding stove conveniently provides zone heating furnace performance while the insert easily converts your existing, drafty, masonry fireplace into an efficient, reliable heating source. Each model gives you uncompromising pellet performance year after year with the comfort of knowing you have selected a product made from true craftsmanship with advanced technological innovations.
Features:
- Full BTU range from 8,000 to 43,000 (may vary depending on pellet quality)
- Door available in painted black, satin chrome and 24 kt gold plated
- Convenient top, front pellet loading for easy fueling
- Automatic ignitor
- Variable speed auger and variable speed blower provide maximum comfort and control
- Heavy-duty, 1/8 thick, seamless heat exchange tubes radiate heat into the room even after the stove is shut down
- High velocity and strategically positioned burn pot features aerodynamic pellet distribution creating full, active YELLOW DANCING FLAMES
- Four stage FAILSAFE system for your peace of mind, featuring an automatic blower over-ride switch, high temperature limit switch, low air pressure switch and power failure safety shut down
- Easy push open access control panel
- Hinged door for convenient access to combustion chamber for routine maintenance... no tools required
- Handy burn pot removal tool/rake
- Built-in heat exchange cleaner rod maintains cleanliness and efficiency of heat exchange tubes
- Extra large capacity ash pan for convenient, easy ash removal and maintenance
- Convenient, easy and clean ash pan removal
- Zone heating home furnace
- Clean glass air wash system
- Presidents Limited Lifetime Warranty
Specifications:
- Hopper Capacity 55 lbs
- Area Heated: Up to 2,000 sq ft
- Burn Rate: 1-5 lbs/hr
- Burn Time (low burn): 55 hours
- Flue Diameter: 3"
- Electrical Rating: 115 Volts 3.6 Amps, 60Hz
- Clearance to combustibles: Corner: 2", Rear: 3", Sides: 6"
- Approved for use in mobile homes
- Must be installed on a non-combustible floor protector extending 6" in front and both sides
Unit Includes: Concealed control panel, heat exchanger, black trivet, dual painted black accent rods, burn pot removal tool/rake, 120 CFM convection fan, pedestal with concealed ash pan, auto ignitor, air wash system, 55 lb hopper.
NPS40 Rear Vent Pellet Stove Installation Manual
NPS40 Rear Vent Pellet Stove Brochure
Tax Credit Certificate
Pellet Stove Brick or Porcelain Panels
Improve the interior of your Napoleon gas fireplace with these optional inserts. Get the true look of masonry with the Decorative Brick Panels available here in sandstone. If you prefer, cast the glowing reflection of your cozy fire with the Porcelain Radiant Reflective Panels for a look of sleek sophistication and ambience.
Pellet Stove Decorative Log Set
With this Pellet Stove Log Set, you can achieve a realistic glow in your Napoleon pellet burning stove. No need to chop or season wood any longer. No more mess bringing wood in from the outside. This fully naturalistic Gas Log Set will warm you through the winter efficiently without losing that cozy, wood burning stove feel!
Features:
- Available in satin chrome or 24 karat gold plated
- Decorative lattice cut-outs
Pellet Stove Hopper Extension
Use the Hopper Extension to increase the hopper capacity of your Napoleon pellet burning stove from 55 lbs to 100 lbs. By increasing your fuel carriage, you're able to extend your burn time and make loading your pellet stove less of a chore.
Pellet Stove Outside Air Kit
This outside air kit includes 5 feet of piping (2" diameter) with a through wall vent. It allows combustion with outside air and venting to the outdoors. Note: for optimum performance, it is recommended that 4" diameter venting be utilized in high altitude regions (above 4,000 feet) or when vertical venting exceeds 15 feet.
See Similar Products:
Dimensions & Weights
|
|
|
| NPS40 Pellet Stove |
Unavailable |
202 lbs |
| Door for NPS40 Rear Vent Pellet Stove |
Unavailable |
14 lbs |
| Optional Pellet Stove Brick or Porcelain Panels |
Unavailable |
5 lbs |
| Optional Pellet Stove Decorative Log Set |
Unavailable |
10 lbs |
| Optional Pellet Stove Outside Air Kit |
Unavailable |
2 lbs |
| Pellet Stove Hopper Extension |
Unavailable |
8 lbs |
Napoleon:
Napoleon is North Americas largest privately owned manufacturer of
wood and gas fireplaces, free standing stoves, inserts, quality gas and charcoal grills, barbecue accessories and patio heaters.
Napoleon concentrates on learning what discerning consumers want and making sure that these needs are integrated into their products.
Napoleon's commitment to producing quality products combined with honest, reliable service has proven to be a successful framework for ensuring the continued rapid growth of the company.
More on Napoleon...
General Shipping Information:
- Shipping EstimateView
- Stock Status:View
-
Ships to:
- Ship Method:Truck Freight
- Upgrade Available?
No
Truck Freight Additional Information:
This product is too heavy/large to ship via the small package delivery services (e.g. UPS, FedEx) so it will be sent to you via truck freight. Truck freight is different than standard UPS, FedEx or US Mail in that you will be responsible for carrying the product from the back of the truck into your house (or wherever it's going).
The most important thing to remember about truck freight is that you MUST inspect the package at the time of delivery. If the box has any damage, or if there is any reason for you to be at all concerned about damage, please write "PRODUCT DAMAGED" clearly on the sheet that they ask you to sign. This simply insures that if there is any damage, it will be easy to take care of the problem.
If you are ordering a very large item, please keep in mind that you may need a couple of people to help unload it. Alternatively, most truck freight companies offer additional services to help you move items from the truck into your house. Once we email you the tracking information you can contact the shipper directly to inquire about additional services. You would be responsible for directly paying the truck freight carrier for any additional services.
