NPS40 Rear Vent Pellet Stove
A renewable energy source, environmentally friendly, economical, convenient...these are just some of the reason a Napoleon pellet stove or insert is the perfect solution to heat your home. The freestanding stove conveniently provides zone heating furnace performance while the insert easily converts your existing, drafty, masonry fireplace into an efficient, reliable heating source. Each model gives you uncompromising pellet performance year after year with the comfort of knowing you have selected a product made from true craftsmanship with advanced technological innovations.
Features:
- Full BTU range from 8,000 to 43,000 (may vary depending on pellet quality)
- Door available in painted black, satin chrome and 24 kt gold plated
- Convenient top, front pellet loading for easy fueling
- Automatic ignitor
- Variable speed auger and variable speed blower provide maximum comfort and control
- Heavy-duty, 1/8 thick, seamless heat exchange tubes radiate heat into the room even after the stove is shut down
- High velocity and strategically positioned burn pot features aerodynamic pellet distribution creating full, active YELLOW DANCING FLAMES
- Four stage FAILSAFE system for your peace of mind, featuring an automatic blower over-ride switch, high temperature limit switch, low air pressure switch and power failure safety shut down
- Easy push open access control panel
- Hinged door for convenient access to combustion chamber for routine maintenance... no tools required
- Handy burn pot removal tool/rake
- Built-in heat exchange cleaner rod maintains cleanliness and efficiency of heat exchange tubes
- Extra large capacity ash pan for convenient, easy ash removal and maintenance
- Convenient, easy and clean ash pan removal
- Zone heating home furnace
- Clean glass air wash system
- Presidents Limited Lifetime Warranty
- Optional Pellet Stove Brick or Porcelain Panels, Optional Pellet Stove Hopper Extension and Optional Pellet Stove Outside Air Kit are not included and must be purchased separately

Specifications:
- Hopper Capacity 55 lbs
- Area Heated: Up to 2,000 sq ft
- Burn Rate: 1-5 lbs/hr
- Burn Time (low burn): 55 hours
- Flue Diameter: 3"
- Electrical Rating: 115 Volts 3.6 Amps, 60Hz
- Clearance to combustibles: Corner: 2", Rear: 3", Sides: 6"
- Approved for use in mobile homes
- Must be installed on a non-combustible floor protector extending 6" in front and both sides
Unit Includes: Concealed control panel, heat exchanger, black trivet, dual painted black accent rods, burn pot removal tool/rake, 120 CFM convection fan, pedestal with concealed ash pan, auto ignitor, air wash system, 55 lb hopper.
NPS40 Rear Vent Pellet Stove Installation Manual
NPS40 Rear Vent Pellet Stove Brochure
Tax Credit Certificate
Optional Pellet Stove Brick or Porcelain Panels
Improve the interior of your Napoleon gas fireplace with these optional inserts. Get the true look of masonry with the Decorative Brick Panels available here in sandstone. If you prefer, cast the glowing reflection of your cozy fire with the Porcelain Radiant Reflective Panels for a look of sleek sophistication and ambience.
Features:
- Available in satin chrome or 24 karat gold plated
- Decorative lattice cut-outs
Optional Pellet Stove Hopper Extension
Use the Hopper Extension to increase the hopper capacity of your Napoleon pellet burning stove from 55 lbs to 100 lbs. By increasing your fuel carriage, you're able to extend your burn time and make loading your pellet stove less of a chore.
Optional Pellet Stove Outside Air Kit
This outside air kit includes 5 feet of piping (2" diameter) with a through wall vent. It allows combustion with outside air and venting to the outdoors. Note: for optimum performance, it is recommended that 4" diameter venting be utilized in high altitude regions (above 4,000 feet) or when vertical venting exceeds 15 feet.